Datos Tecnicos Algunas Fibras Mercado

Pos eso, algunos datos tecnicos sobre fibras de la ropa que se puede
encontrar en el mercado. Lo siento esta en ingles, y ultimamente estoy muy vago


MATERIAL

20 D PERTEX® QUANTUM
Extremely light and downproof 20 denier polyamide ripstop with high vapour permeability and extremely good packability. Very good strength to weight ratio.
Weight: 30 g/m2
210 D BABYRIP POLYAMIDE
Very light 210 denier polyamide rip stop fabric with good abrasion and tear strength. Double PU-coating for improved waterproofness.
Water column: >2000 mm
Weight: 120 g/m2
30 D PERTEX MICROLIGHT
30 D downproof polyamide microfibre fabric with double rip. Strong, light weight and with high vapour permeability. With Pertex Shield water repellent treatment.
Weight: 42 g/m2
40 D PERTEX RS
40 D polyamide fabric. With high vapour permeability. With Pertex Shield water repellent treatment.
Weight: 52 g/m2
420 HD BALLSHADOW NYLON
420 denier high density polyamide fabric with very good abrasion and tear strength. Double PU-coating for improved waterproofness.
Water column: >1500 mm.
Weight: 260 g/m2
420 HD DUPONT CORDURA®
420 denier high density with high tenacity polyamide yarns. Ripstop fabric with extremely good abrasion and tearing strength. PU-coated in two steps for improved waterproofness.
Water column >1500 mm
Weight: 235 g/m2.
420 HD RS POLYAMIDE
420 denier high density polyamide ripstop fabric with good abrasion and tearstrength. Double PU-coating for improved waterproofness.
Water column: >1500 mm
Weight: 225 g/m2
630 D OXFORD
High density fabric with extremely good abraison and tearing strength. PU-coated in two steps for improved waterproofness.
Material: 100% polyamide
Weight: 330 g/m2
70 D POLYAMIDE RS WITH TPU-COATING
Light and durable 70 denier polyamide ripstopfabric with good abrasion and tearingstrength. Double TPUcoating (thermoplastic urethane) which is excellent for RF and heat welding. Used on the Watatait range.
Water column >5000 mm
Weight: 95 g/m2

BALLISTIC® 840 D
Extremely rip-resistant and anti-pilling polyamide fabric. Used for vulnerable areas on backpacks.
Water column: >1500 mm
Weight: 390 g/m2
CLARINO 950
A durable and pliable non woven fabric.
Material: 100% polyamide, 0,8 mm
CLARINO® 951
A durable Clarino® material with a unique emboss pattern and excellent tack and softness.
Material:100% polyamide
CLIMATIC LIGHT 107
A plain weave fabric. Light weight with a very soft hand in Polymide Supplex.
Intera treatment gives the fabric a permanent moisture transport (wicking) ability: Intera spreads moisture over a wide surface, which speeds up evaporation and drying. UPF 40.
Material: 100% Polyamide Supplex
Weight: 95 g/m2
CLIMATIC LIGHT 108
A light weight plain weave fabric. With a peached face side and a very soft hand in Polymide Supplex. 3M Scotch guard Wicking treatment gives the fabric a permanent moisture transport ability: Wich spreads moisture over a wide surface, which speeds up evaporation and drying UPF 20+
Material: 100% PA Supplex
Weight: 88 g/m2
CLIMATIC LIGHT 109
A light weight plain weave checkered fabric. With a peached face side and a very soft hand in Polyester/Polyamide. 3M Scotch guard® wicking treatment gives the fabric a permanent moisture transport ability: Wich spreads moisture over a wide surface, which speeds up evaporation and drying UPF 20+
Material: 60% PES, 40%PA
Weight: 103 g/m2
CLIMATIC LIGHT 117
A lightweight ripstop structure fabric with a 2-way weft stretch function. Wicking treated. UPF 20+.
Material: 100% polyester
Weight: 95 g/m2
CLIMATIC MID 132 2-WAY
A double weave 2-way stretch fabric. Polyamide face makes
the fabric abrasion resistant. Brushed backside for a smooth touch with wicking properties. DWR treated.
Material: 87,4% polyamide, 12,6% lycra
Weight: 185 g/m2
CLIMATIC® HEAVY 142
A fabric with a canvas structure. Durable and highly abrasion resistant yet supple. Windproof. Quick drying, DWR treated. UPF 30+.
Material: 100% polyamide fulldull
Weight: 250 g/m2
CLIMATIC® HEAVY 142MP
Same base fabric as Climatic 141 but with a breathable coating and a watercolumn of 2000 mm. This treatment makes the fabric extra water resistant. UPF 50+.
Material: 100% polyamide fulldull
Weight: 300 g/m2
CLIMATIC® LIGHT 110
A lightweight plain weave fabric with a peached face side for a soft touch. 3M® Scotchguard® wicking treatment gives the fabric permanent moisture transport ability. Spreads moisture over a wide surface, and thereby speeds up evaporation and drying. UPF 30+.
Material: 100% polyamide
Weight: 132g/m2
CLIMATIC® LIGHT 119
A lightweight plain weave fabric with a peached face side for a soft touch. DWR treated, wind resistant and highly breathable. UPF 20+.
Material: 100% polyamide
Weight: 132g/m2
CLIMATIC® MID 133
A flat-weave fabric. Durable, wind resistant and quick drying. DWR treated. UPF 20+
Material: 100% polyamide fulldull
Weight: 180 g/m2
CORDURA® 961
A rugged 330D Cordura® with excellent abrasion resistance and tear strength. DWR treated.
Material: 100% polyamide HT Cordura®

DRYSKIN 983
Soft, cool and light weight denier gradient fabric. Coarser yarns on the back and finer yarns on the face combined with a wicking treatment cause moisture to spread rapidly. Good abrasion resistance.
UPF factor 16
Material: 100% PES
Weight: 120g/m2
DRYSKIN 984 X-STATIC
Soft, cool and light weight denier gradient fabric. Coarser yarns on the back and finer yarns on the face combined with a wicking treatment cause moisture to spread rapidly. Good abrasion resistance.
Fabric characteristics of X-static, the silver fiber: Antimicrobial - eliminates odor-causing bacteria.
All natural - safe and non-toxic, containing no chemicals.
Heat transfer - cooler in the summer, warmer in the winter. Antistatic. UPF factor 13
Material: 56% PES, 44% PES X-static
Weight: 145 g/m2
DRYSKIN 985
Brushed micro Polyester warpknit. Soft feel, good thermal properties, “A unique multi-layered fabric which efficiently transports perspiration outward through capillary action, keeping the wearer dry and comfortable”.
This material is used as a lining.
Material: 100% Microfiber PES
Weight: 127g/m2
DRYSKIN STRETCH 958
4-way stretch fabric with a durable polyamid face. Polyester backing will rapidly wick moisture. Excellent thermal properties with next to skin comfort.
Material: 67% polyester, 24% polyamid, 9% spandex
Weight: 260g/m2
DRYSKIN® 75 D
75 D fiberproof polyester fabric. Comfortable against the skin and with good wicking properties.
Weight: 70 g/m2
DRYSKIN® 956
A soft 2-layer denier gradient pique knit fabric with permanent high wicking properties. Dries rapidly. Next-to-skin comfort. UPF 10+.
Material: 100% polyester Toray® CEO Alpha
Weight: 165g/m2

DUPONT QUALLOFIL®
Seven-channel polyester fibre with good insulating properties. Machine washable.
DUPONT TACTEL® 44 D
44 D fiberproof polyamide fabric developed for linings on sleepingbags. Good wicking properties and with high vapour permeability. Comfortable against the skin.
Weight: 47 g/m2
DUPONT THERMOLITE® EXTRA
A three-hole lowdenier polyester spiral fibre with high loft, low weight. Machine washable.
DUPONT THERMOLITE® MICRO
Microfibre filling with similar properties to down. Machine washable.
DUPONT® TACTEL 33/45 D
33/45 D fiberproof polyamide fabric developed for technical sleeping bags. Light, water repellent and with high vapour permeability.
Weight: 43 g/m2


FILLPOWER 600+
Premium high loft goose down of polish or french origin.

FLEXABLE 440 (SOFT SHELL)
A mid weight durable soft shell fabric with excellent 4-way stretch function. Incorporates the system of shell and insulation (mesh knit) in one fabric. The smooth and supple, tightly woven mini-ripstop face offers great abrasion resistance. Highly wind resistant, highly breathable, snow & water shedding. The closed-mesh backing offers soft next-to-skin comfort with low friction. DWR treated.
Face material: 100% polyamide supplex/lycra
Backing: 100% polyester
Weight: 300 g/m2
FLEXABLE 441 (SOFT SHELL)
A durable soft shell fabric with excellent 4-way stretch function. Incorporates the system of shell and insulation (fleece) in one fabric. The smooth and supple, tightly woven mini-ripstop face offers great abrasion resistance. Highly wind resistant, highly breathable, high thermal properties, snow & water shedding. The fleece backing offers soft next-to- skin comfort. DWR treated.
Face material: 100% polyamide supplex/lycra
Backing: 100% polyester
Weight: 400g/m2
FLEXABLE® 442
A lightweight, wind resistant 4-way stretch fabric with superior abrasion resistance. Next-to-skin comfort backing. The backing contains the Magic Silver fiber with powerful anti microbial and deodorization effect. Double Action treated (DWR treated) face and wicking function inside to create a comfortable fabric suited for a wide variety of technical activities. UPF 30+.
Face material: 92% polyamide Tactel®, 12% Lycra®
Backing: 25% Magic Silver (PES/Silver)
Weight: 205g/m2
FLEXABLE® 443
A midweight wind resistant 4-way stretch fabric with superior abrasion resistance. Next-to-skin comfort polyester backing. Double Action treated meaning DWR treated face and wicking function inside to create a comfortable fabric suited for a wide variety of technical activities. UPF 30+.
Face material: 47% polyamide, 9% spandex
Backing: 44% polyester
Weight: 240g/m2
FLEXABLE® 443
A midweight wind resistant 4-way stretch fabric with superior abrasion resistance. Next-to-skin comfort polyester backing. Double Action treated meaning DWR treated face and wicking function inside to create a comfortable fabric suited for a wide variety of technical activities. UPF 30+.
Face material: 47% polyamide , 9% spandex
Backing: 44% polyester
Weight: 240g/m2
FLEXABLE® 444
A highly abrasion resistant 4-way stretch Cordura® reinforced fabric. DWR treated.
Face material: 85% polyamide Cordura®, 15% Lycra®
Laminate: Non-porous hydrophilic laminate.
Performance: Hydrostatic head – 5000mm
M/P Inverted cup method – 15,000g
Weight: 195g/m2
GOOSE DOWN
In our sleepingbags we use premium high loft goose down with fillpower 700+ and 600+ of polish or french origin.


GORE-TEX®
Gore-Tex® membrane laminated to a polyester face fabric used in the inner bootie which has maximum breathability and waterproofness.
GORE-TEX® 2-LAYER 230
A flat weave fabric with excellent abrasion resistance and high tear strength. Matt finish with a soft hand.
Material: 100% polyamide
Weight: 140 g/m2
GORE-TEX® 2-LAYER 231
A light weight, very soft and low noise fabric. Flat weave structure with a matt, slightly brushed, and soft touch finish.
Material: 100% PES
Weight: 113 g/m2
GORE-TEX® 2-LAYER XCR 203
A flat weave fabric with excellent abrasion resistance and tear strength. Matt finish with a very supple fabric handle.
Material: 100% polyamide
Weight: 121 g/m2
GORE-TEX® 2-LAYER XCR 206
A light weight, mini ripstop face fabric with good abrasion resistance and a very supple feel.
Material: 100% polyamide
Weight: 97 g/m2
GORE-TEX® 2-LAYER XCR 207
A rough fabric in Cordura. Excellent abrasion resistance and tear strength, yet a nice fabric handle.
Material: 100% polyamide Cordura
Weight: 176 g/m2
GORE-TEX® 2-LAYER XCR® 208
An extremely lightweight 20D fabric with a mini-ripstop low profile structure. Highly packable, soft and quiet.
Material: 100% polyamide
Weight: 70g/m²

GORE-TEX® 2-LAYER XCR® 209
A plain lightweight 40D fabric with a soft touch. Highly packable and quiet.
Material: 100% polyamide
Weight: 90g/m²

GORE-TEX® 3-LAYER SOFT SHELL 309
A soft shell fabric with a woven rugged face and a grid structured loft backing to trap air and offer enhanced insulation with maintained high breathability.
Face material: 100% polyamide
Backing: 100% polyester
Weight: 218g/m²
GORE-TEX® 3-LAYER XCR 301
Light weight, supple feeling mini-ripstop fabric with high tear strength and good abrasion resistance.
Material: 100% polyamide
Weight: 128 g/m2
GORE-TEX® 3-LAYER XCR 302
Shell material with a soft texture, good durability, tear resistance and anti-pilling properties. Soft finish.
Material: 100% polyamide
Weight: 158 g/m2
GORE-TEX® 3-LAYER XCR 305
A plain fabric with low structure and high degree of stretch/recovery. Very good abrasion resistance. Cordura yarn.
Material: 100% polyamide Cordura® elastan.
Weight: 230 g/m2.
GORE-TEX® 3-LAYER XCR 307
A rough fabric in Cordura. Excellent abrasion resistance and tear strength yet a nice fabric handle.
Material: 100% polyamide Cordura
Weight: 216 g/m2
GORE-TEX® 3-LAYER XCR 310
A lightweight 40D, low structure mini ripstop fabric, with excellent performance. Good tear strength and abrasion resistance. Highly packable, soft and quiet.
Face material: 100% polyamide
Backing: 100% polyester
Weight: 122g/m²
GORE-TEX® 3-LAYER XCR 311
A 70D fabric with a plain surface. Used mainly as a reinforcement fabric with excellent tear strength and abrasion resistance. Highly packable, soft and quiet.
Face material: 100% polyamide
Backing: 100% polyester
Weight: 144g/m²
GORE-TEX® 3-LAYER XCR 312
A 210D fabric with a plain rugged surface. Used as a reinforcement fabric with excellent tear strength and abrasion resistance, yet soft.
Face material: 100% polyamide
Backing: 100% polyester
Weight: 225g/m²
GORE-TEX® 3-LAYER XCR® 308
A 22D fabric, laminated with a low profile mini-ripstop structure. Extremely lightweight, soft and packable.
Material: 100% polyamide
Weight: 105g/m2
GORE-TEX® PACLITE® 254
The lightest Gore-Tex® Paclite® fabric available, soft and smooth feel. Mini ripstop structure with good lustre. No friction. Carbon-coated inside for better durability.
Material: 100% polyamide
Weight: 80 g/m2
GORE-TEX® PACLITE® 255
A flat weave fabric with excellent abrasion resistance and tear strength. Matte finish and very supple feel.
Material: 100% polyamide
Weight: 120g/m2
HP LINING
A Haglöfs developed woven lining with extreme breathability through a perforated pattern to enhance comfort, low weight and lower friction than a mesh lining.
Material: 100% polyester
Weight: 65g/m2
IBQ 860 DRYKEEP
The outer face is made in Hi-Tenacity PA, which assures high abrasion resistance. The interior of the fabric is 100% in Coolmax, which guarantees
inherent wicking properties that keep you cool and ensure quick drying of the garment. The material has Lycra in both warp and weft, which guarantees comfort & freedom of movement.
Material: 70% PA, 20% PES Coolmax, 10% Lycra
Weight: 250 g/m2
IBQ 862
A 500D Cordura‚ weave, that is ceramic coated on the outer surface to improve abrasion resistance and tear strength.
Material: 100% PA Cordura
Coating: Ceramic
Weight: 320g/m2
INNER TENT
30-denier polyester ripstop fabric, with water-repellent treatment.
Weight: 37 g/m2.
INNER TENT FLOOR
PU-treated, 40-denier polyamide ripstop.
Water column mvc over 2,000 mm.
Weight: 50 g/m2.

NUBUCK SCANDINAVIAN LEATHER
Carefully selected with optimum breathability for Gore-Tex® shoes.
OUTER TENT FLOOR
Durable, 70 denier, PU-treated polyamide fabric.
Water column mvc 5,000 mm.
Weight: 80 g/m2.
OUTER TENT FLY
Extremely rip-resistant, 40-denier polyamide ripstop fabric, specially produced for Haglöfs new Genius tent. Silicone-treated.
Water column mvc over 2,000 mm.
Weight: 51 g/m2.
OXFORD 420 HD NYLON
420 denier high density polyamide fabric with good abrasion and tearstrength. Double PU-coating for improved waterproofness.
Water column: >2000 mm.
Weight: 220 g/m2.
OXFORD 630 HD POLYAMIDE
630 denier high density polyamide fabric with extremely good abrasion and tear strength. Double PU-coating for improved waterproofness.
Water column: >2000 mm.
Weight: 265 g/m2.
PERFORMAC 1002
Extremely lightweight 20D fabric with mini-ripstop structure. Highly breathable and windproof. Super DWR treated to keep the fabric dry longer. Extremely packable with minimum bulk.
Material:100% polyamide
Weight: 35g/m2
PERFORMAC® 1001
A 30 denier mini rip stop weave with low weight and bulk. Highly breathable and windproof. Super DWR treated which keeps the fabric dry longer. Excellent softness.
Material: 100% polyester, calendared
Weight: 58 g/m2
PERFORMAC® RIPSTOP NYLON
Light polyamide fabric with good vapour permeability.
Weight: 50 g/m2.
PERTEX ENDURANCE
40/75 D downproof polyamide fabric with microporous coating. Very strong and with excellent water repellency and high vapour permeability. Totally windproof.
Weight: 63 g/m2
PERTEX QUANTUM
A single ripstop structure. Extremely light weight, good lustre & DWR treated. High strength/weight ratio.
100 % PA. 30g/m2.
PERTEX® 914
Plain weave with low weight and low bulk. Highly breathable, windproof and treated with the new Pertex Shield® technology. A water repellent finish that uses a unique formula and production process to keep the fabric drier for longer and improving durability.
Material: 100% polyamide, calendared
Weight: 54 g/m2
PERTEX® MICROLIGHT 30 D
30 D downproof polyamide microfibre fabric developed for linings on sleepingbags. With special Ökotex certified (standard 100) hydrophilic wicking finish. High vapour permeability and very comfortable against the skin.
Weight: 41 g/m2
PITTARDS MUSTANG SUEDE 953
Lightly sanded nubuck for a good grip even in the wet. Water repellant and quick drying. Hardwearing.
Material: 100% cow, 1,0-1,2 mm.
PITTARDS® ARMOR-TAN GOAT 954
One of the most hard-wearing, durable and water-resistant leathers.
Material: 100 % goat. 0,65-0,75 mm
PITTARDS® ARMOR-TAN GOAT 955
One of the most hard-wearing, durable and water-resistant leathers.
Material: 100 % goat. 0,75-0,85 mm
PITTARDS® ARMOR-TAN GOAT 956
One of the most hard-wearing, durable and water-resistant leathers.
Material: 100 % goat. 1-1,2 mm

POLARTEC® MICRO 761
Extremely soft and comfortable double velour micro fleece. Good breathability and low pill.
Material: 100% polyester
Weight: 138 g/m2
POLARTEC® POWER DRY® 700
Light weight fabric with next to skin comfort. High wicking properties. Soft and comfortable against the skin. Sun protection factor 20+.
Material: 100% polyester.
Weight: 107 g/m2.
POLARTEC® POWER DRY® 701
Mid weight, technical material with high wicking properties. Pill resistant surface. UPF 20+. Soft and comfortable against the skin. Warm with excellent breathability. Dries rapidly.
Material: 100% polyester
Weight: 174 g/m2
POLARTEC® POWER DRY® 704
Comfort stretch material for perfect fit and freedom of
movement. High wicking properties with excellent thermal
properties. Brushed smooth inside.
Material: 97% polyester, 3% spandex
Weight: 170 g/m2
POLARTEC® POWER STRETCH® 720
Lighter 4-way stretch material for perfect fit and freedom of movement. Wicks away moisture and keeps the body dry and comfortable. Good thermal properties. Smooth, durable outside. Brushed inside.
Material: 66% polyamide, 24% polyester, 10% Lycra
Weight: 160 g/m2
POLARTEC® POWER STRETCH® 721
4-way stretch material for perfect fit and freedom of movement. Wicks away moisture and keeps the body dry and comfortable. Good thermal properties. Smooth, durable outside. Brushed inside.
Material: 55% polymide, 35% polyester, 9% lycra
Weight: 237 g/m2
POLARTEC® POWERSTRETCH® SPECIAL EDITION 722 SE
Power Stretch® Special Edition technology gives enhanced performance to Power Stretch®. Warmth without weight, small pack size and superior comfort.
Material: 42% polyester, 43% polyamide, 15% Lycra
Weight: 230 g/m2
POLARTEC® THERMAL PRO 740
Durable mid weight fleece fabric with special double low velour finish.
Provides very good warmth/weight ratio. Quick drying, Highly breathable and DWR treated.
Material: 100% polyester.
Weight: 262 g/m2
POLARTEC® THERMAL PRO(TM) 743
This fabric has the highest warmth to weight ratio of all Polartec® materials. A unique construction which maximizes airflow and minimizes weight whilst having low bulk. Double-sided velour pile.
Material: 100% polyester.
Weight: 310 g/m2.
POLARTEC® THERMAL PRO® 746
A midweight high-loft fabric with the highest warmth to weight ratio of all Polartec® fabrics. A unique construction that maximizes airflow and minimizes weight and bulk. Double-sided velour pile with an extremely soft hand and low friction.
Material: 100% polyester
Weight: 310/m2
POLARTEC® WINDPRO® 763
A wind-resistant, knitted fabric (4 times more wind-resistant than traditional fleece) that greatly reduces wind chill. Excellent stretch with Hardface®-technology treated surface, which increases abrasion and snag/pick resistance and enhances the durable water repellency. The fabric wicks away moisture and keeps the body dry and comfortable.
Good thermal properties with a soft fleece inside.
Material: 93% polyamide, 7% spandex
Weight: 310 g/m2
POLYESTER MESH
Lining in polyester mesh
POLYTEX PRO
A durable fabric with a canvas structure. A thin PU-coating gives a very good water repellancy and a reasonable breathability.
Material: 100% polyester
Weight: 370 g/m2
POLYTEX® DIAMOND DTY 450 D
450 denier polyester/ripstop fabric with “diamond structure”. Laminated PU treated for improved waterproofness and durability. Extremely rip-resistant in relation to its weight.
Water column: >1500 mm.
Weight: 250 g/m2.
POLYTEX® DTY
600 denier polyester fabric that is extremely rip-resistant in relation to its weight. Laminated PU treated for improved waterproofness and durability.
Water column: >1500 mm.
Weight: 300 g/m2.
POLYTEX® PLUS DTY
900 denier polyester fabric. Laminated PU treated for improved waterproofness and durability.
Water column: >1500 mm.
Weight: 350 g/m2.
POLYTEX® RS DTY
450 denier polyester/ripstop fabric. Double PU-coating for improved waterproofness and durability.
Water column: >1500 mm.
Weight: 250 g/m2.
PRIMALOFT®
Microfiber insulation with excellent warmth capacity. Soft. Laminated to a brushed warpknit with next to skin comfort.
PROOF 940
A wind and waterproof glove insert with good breathability. Very soft feel.
PROOF® 934
A semi dull 2-layer low profile ripstop fabric. Extremely soft hand. DWR treated.
Face material: 100% PA
Laminate: Polyurethane hydrophilic membrane Performance: Hydrostatic head – 20,000 mm, M/P Inverted cup method – 25,000g
Weight: 85 g/m2
PROOF® 935
Extremely lightweight fabric, suitable for down garments. Has a flat, rectangular ripstop structure with high lustre and a soft feel.
Face material: 100 % DA
Laminate: Polyurethane hydrophillic mambrane
Performance: Hydrostatic head -20,000 mm. M/P inverted
cup method: -20,000 g
Weight: 55 g/m2
PROOF® 936
A waterproof 2,5-layer micro ripstop fabric with a dry touch coating. Fulldull face fabric, lightweight and compressible. DWR treated.
Material: 100% polyamide
Coating: Non-porous hydrophilic coating.
Performance: Hydrostatic head – 10,000mm
M/P Inverted cup method – 15,000g
Weight: 105g/m2
PROOF® 937
Abrasion resistant yet supple face fabric with a waterproof dry-touch coating. Compressible and DWR treated.
Material: 100% polyamide
Coating: Non-porous hydrophillic coating
Performance: Hydrostatic head – 10,000mm
M/P Inverted cup method – 15,000g
Weight: 165g/m2
SCHOELLER® 870 DYNAMIC WB
A fabric with high durability. Laminated and with a DWR finish. High abrasion resistance. Water column mvc > 4000 mm.
Material: 72% polyamide Cordura®, 11% elastan, 17% PU.
Weight: 240 g/m2.
SCHOELLER® 880 KEPROTEC®
A strong polyamide/Kevlar material with extreme tear strength. Used to protect trousers from crampon points etc. Very good abrasion resistance.
Material: 58% polyamide Cordura®, 23% aramid (Kevlar), 19% PU.
Weight: 240 g/m2.
SCHOELLER® 881 KEPROTEC®
A strong polyamide/kevlar material with extreme tear strength. Used to protect trousers from crampon points etc. Very good abrasion resistance. Lighter than 880.
Material: 78% polyamide Cordura®, 16% aramid (kevlar), 6% PU
Weight: 165 g/m2
SPANDEX WITH LAMINATED PU
A stretch fabric with a durable face. Laminated PU-film makes it waterproof.
Material: 40 D polyamid
Weight: 358 g/m2
TARPOULIN
Non PVC coated polyamide of tarpaulin type. Resistant to ripping, pilling and abrasion. Waterproof.
TENT POLES
Aluminium 7075 T9.

THERMOLITE® MICRO 100
Microfibre filling with similar properties to down.
Weight: 100 g/m2
THERMOLITE® MICRO 150
Microfibre filling with similar properties to down.
Weight: 150 g/m2
THERMOLITE® MICRO 200
Microfibre filling with similar properties to down.
Weight: 200 g/m2
THERMOLITE® MICRO 80
Microfibre filling with similar properties to down.
Weight: 80 g/m2
TORAY 810 KNIT
A high stretch fabric. Wind and waterproof with good breathability. DWR treated and high wicking properties. PU laminated.
Material: 100% polyester.
Weight: 138 g/m2.
TORAY 821
A lightweight microfiber fabric, Downproof & DWR treated.
Material: 100% polyester microfiber- high density & calendared.
Weight: 108 g/m2
ULTRAFINE DENIER FIBER
Lightweight polyester-fibre mix with three different types of extremely thin (ultrafine denier) hole fibre. The fibre mix has undergone a special treatment that produces an extremely durable filling with a very low weight.
VIBRAM®
Vibram® rubber outsole with PU midsole, density 50/55 shore A and Haglöfs 1-2-3 flex system.

WINDSTOPPER 430 (SOFT SHELL)
A Windstopper softshell fabric. Incorporates the system of shell and fleece in one fabric. The smooth tightly knitted face offers great abrasion resistance. Windproof and Snow & water shedding. The fleece back offers soft next-to-skin comfort. Primary attributes include low weight, flexibility in a one-way stretch material.
Material: Face; 100% Polyester PBT(stretch Polyester yarn).
Backing; 60% Polyester PBT, 40% Polyester.
Weight: 310 g/m2
WINDSTOPPER® 431 (SOFT SHELL)
A Windstopper® Soft Shell fabric. Incorporates the system of shell and fleece in one fabric. Tightly woven face offers strong abrasion resistance. Windproof, snow & water shedding. The fleece back offers soft next-to-skin comfort. Heavy duty fabric used mostly in reinforced areas.
Face material: 91% polyamide, 9% Lycra®
Backing: 100% polyester
Weight: 323 g/m2
WINDSTOPPER® 435 (SOFT SHELL)
A midweight Windstopperâ soft shell fabric. Incorporates the system of shell and insulation (fleece) in one fabric. The smooth and supple tightly knitted face offers great abrasion resistance. Windproof, snow and water shedding. The pile backing offers soft next-to-skin comfort. Primary attributes include high thermal properties, flexibility and DWR treatment.
Material:
Face; 100% polyester
Backing; 100% polyester
Weight: 425g/m2
WINDSTOPPER® (SHELL)
A new generation of windproof material designed to offer very high breathability and comfort in a wide range of activities. Using Activent technology.
WINDSTOPPER® 402 (SHELL)
Laminated light ripstop fabric with improved tear strength and superior breathability. DWR (Durable Water Repellant) treated.
Material: 100% polyamide.
Weight: 81 g/m2
WINDSTOPPER® 403
A durable heavy duty fabric with canvas structure. Windproof, highly breathable and DWR treated with a soft feel.
Material: 100% polyamide.
Weight: 170 g/m2.
WINDSTOPPER® 431 - (SOFT SHELL)
A Windstopper® Soft Shell fabric. Incorporates the system of shell and fleece in one fabric. Tightly woven face offers strong abrasion resistance. Windproof and snow & water shedding. The fleece backing offers soft next-to-skin comfort. Heavy duty fabric used mostly in reinforced areas.
Face material: 91% polyamide, 9% Lycra®
Backing: 100% polyester
Weight: 323 g/m2
WINDSTOPPER® 432 (SOFT SHELL)
A midweight Windstopper‚ soft shell fabric. Incorporates the system of shell and insulation (fleece) in one fabric. The smooth and supple, tightly knitted face offers great abrasion resistance. Windproof, snow & water shedding. The fleece backing offers soft next-to-skin comfort. Primary attributes include low weight, flexibility in a 4-way stretch fabric. DWR treated.
Face material: 100% polyamide 6.6 Tactel
Backing: 100% polyester
Weight: 280 g/m2
WINDSTOPPER® 433 (SOFT SHELL)
A Windstopper® Soft Shell fabric. Incorporates the system of shell and fleece in one fabric. The smooth, tightly knitted face offers great abrasion resistance. Windproof and snow & water shedding. The microcheck fleece back offers medium thermal insulation. DWR treatment and flexibility in a one-way stretch material
Face material: 100% polyester
Backing: 100% polyester microcheck
Weight: 245g/m2
WINDSTOPPER® 434 (SOFT SHELL)
A midweight Windstopper® soft shell fabric. Incorporates the system of shell and insulation (fleece) in one fabric. The smooth and supple woven face offers great abrasion resistance. Windproof, snow and water shedding. The brushed flannel backing offers soft next-to-skin comfort. Primary attributes include low weight, highly soft touch and DWR treatment.
Material:
Face; 100% polyester
Backing; 100% polyester
Weight:195g/m2
WINDSTOPPER® 452
3-layer Windstopper® fleece with micro fleece on the outside and a light brushed mesh on the inside. High insulation to low weight ratio.
Material: 100% polyester
Weight: 240 g/m2
WINDSTOPPER® 454
Our warmest Windstopper in a 3-layer construction with low pill micro fleece on both sides. Very good insulation properties.
Material: 100% polyester.
Weight: 320 g/m2.
WINDSTOPPER® FLEECE
Windstopper fleece has the thermal and very breathable qualities of high quality fleece with the additional benefit of being totally windproof.
Material: 100% polyamide.
Weight: 95 g/m2.
WINDSTOPPER® N2S 457
Fast drying, next-to-skin laminate with "push-pull" effect. Superior wicking and highly breathable. Excellent one way stretch capacity. Abrasion resistant polyamide face, yet soft and supple. Excellent water and snow shedding (DWR).
Face material: 100% polyamide
Backing: 100% polyester
Weight: 270 g/m2

Joer pila de ellas ke hay, y aun asi se kedan en el tintero unas kuantas membranas muy usadas (komo las d Helly Hansen, Spyder, Columbia, el Hyvent de TNF...)

Joe... habra que mirar con más detenimiento antes de comprar nada.... entre tantas fibras uno se piensa q tiene un material de la leche y al final acaba empapao....